Contrary to info in other posts, some flooring adhesives did contain asbestos. Asbestos was used in a wide variety of household products until it became clear that the tiny fibers are dangerous when inhaled in high concentrations. Asbestos fibers remain in the body and as they accumulate, various diseases may result. Asbestos fibers do not pose a health risk until they get airborne. Once airborne, however, there is no level of exposure that’s considered safe. Here’s a general guide to what you should know about asbestos:
,,202235,00.html?xid=yahoo-answers&partner=yes

According to the US Environmental Protection Agency, many asbestos-containing building materials were readily available in the 70s. Unfortunately, you can’t tell whether a material contains asbestos unless you have samples tested in a certified lab. The fact that a home inspection didn’t address the adhesive isn’t surprising–how would they know without removing flooring and testing the adhesive? And I wouldn’t rely on the condo association to notify tenants. They may not know, or they may not want to alarm people because the adhesive wouldn’t be a health hazard unless disturbed.

So I guess you’d have to consider that asbestos adhesive is a possibility. What you do next is a judgement call. Testing would be the safest approach. If testing reveals no asbestos, you’re good to go. If it reveals asbestos, your state regulations come into play. Some states require removal of asbestos-containing materials by certified asbestos mitigation contractors. Some don’t.

For further info, a link to a helpful EPA publicaiton is below.

Adhesive ,s do not contain asbestos . its all chemical,
even if it did, it is not fryable, [powder] so have at it, ya sprinkle it with water to keep the dust down,

I dont think they used asbestos in the adhesive, only the tiles were made with asbestos. but I guess it is a bit late now. why not wet it down as you scrape it off.